Forty-piece tap and die kit in a steel case, offered with metric or SAE thread configurations, matched cutting tools, holders and pitch gauge.
This steel-case 40-piece kit organizes matching taps and dies for workshop threading and repair. Choose the thread configuration for your target market instead of assuming every set contains both systems.
Listed metric sizes: M3×0.5, M3×0.6, M4×0.7, M4×0.75, M5×0.8, M5×0.9, M6×1.0, M6×0.75, M7×0.75, M7×1.0, M8×1.25, M8×1.0, M10×1.25, M10×1.5, M12×1.75 and M12×1.5. A 1/8-27 NPT tap and die are also listed.
Listed UNC sizes run from 4-40 through 1/2-13; UNF options include 10-32 and 1/4-28 through 1/2-20, plus 1/8-27 NPT.
Tap wrench, 1-inch die stock, T-handle tap wrench, pitch gauge and screwdriver are listed. Confirm the final bill of materials and tap type with the quotation.
Provide the full thread designation, material preference, required quantity and packaging or marking requirements. Confirm the final configuration before ordering.
Read the tap drill size guide or send an inquiry to 177Tools.